China F-1600 Triplex Mud Pump for Drilling Rig pulley drive

Item Description

F-1600 triplex mud pump for drilling rig

Mud pump refers to the device that conveys flushing fluid such as mud or drinking water to the borehole for the duration of the drilling method. Mud pump is an essential element of drilling products. In the frequent constructive circulation drilling, the surface area flushing medium – obvious drinking water, mud or polymer flushing fluid is right despatched to the base of the bit by means of the higher-strain hose, tap and drill string central gap beneath a specific force, in buy to awesome the bit, remove and transport the cut rock particles to the surface. The widespread mud pump is piston or plunger type. The crankshaft of the pump is rotated by the electricity engine. The crankshaft drives the piston or plunger to and fro in the pump cylinder by means of the cross head. The objective of urgent and circulating flushing fluids is understood below the alternating action of suction and discharge valves.
 

F-1600 triplex mud pump for drilling rig
 

one.Max.enter: 1300HP(F1300)1600HP(F1600)

two.Stroke length: 305mm

three.Max.velocity: 120SPM

4.Gear ratio: 4.206

 

Specialized Info:

Product F-five hundred F-800 F-a thousand F-1300 F-1600
Variety Triplex one acting Triplex solitary acting Triplex one performing Triplex one acting Triplex single performing
Rated Electrical power 373kw
five hundred HP
596kw
800 HP
735kw
one thousand HP
969kw
1300 HP
1193kw
1600HP
Rated Speed 165SPM 150SPM 140SPM 120SPM 120SPM
Stroke(mm/inch) a hundred ninety/7 1/2” 228.6/9” 254/10” 305/12” 305/12”
Max. Line Dia. 170/6 3/4” 170/6 3/4” 170/6 3/4” a hundred and eighty/7” a hundred and eighty/7”
Gear Kind Herringbone Herringbone Herringbone Herringbone Herringbone
Valve Pot API-five API-six API-6 API-7 API-7
Equipment Ratio 4.286:1 4.185:1 four.207:1 four.206:one 4.206:one
Suction Inlet 203/8” 254/10” 305/12” 305/12” 305/12”
Discharge Inlet 4” Flange
5000psi
5” Flange
5000psi
5” Flange
5000psi
5” Flange
5000psi
5” Flange
5000psi
Lubrication Forced & Splash Forced & Splash Forced & Splash Compelled & Splash Pressured & Splash
Max. Force 27.2MPa
3945psi
34.5MPa
5000psi
34.5MPa
5000psi
34.5MPa
5000psi
35MPa
5000psi
General Size(in) one hundred forty four*106*86 156*seventy nine*66 163*89*70 174*121*seventy eight 181*129*106
Fat(kg) 9770 14500 18790 24572 24791

US $5,000-20,000
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 1 Year
Warranty: 1 Year
Certification: ISO 9001:2000
Power Source: Electric
Operation Pressure: Vacuum
Applicable Medium: Mud, Water, Natural Gas, Crude Oil

###

Customization:

###

Model F-500 F-800 F-1000 F-1300 F-1600
Type Triplex single acting Triplex single acting Triplex single acting Triplex single acting Triplex single acting
Rated Power 373kw
500 HP
596kw
800 HP
735kw
1000 HP
969kw
1300 HP
1193kw
1600HP
Rated Speed 165SPM 150SPM 140SPM 120SPM 120SPM
Stroke(mm/inch) 190/7 1/2” 228.6/9” 254/10” 305/12” 305/12”
Max. Line Dia. 170/6 3/4” 170/6 3/4” 170/6 3/4” 180/7” 180/7”
Gear Type Herringbone Herringbone Herringbone Herringbone Herringbone
Valve Pot API-5 API-6 API-6 API-7 API-7
Gear Ratio 4.286:1 4.185:1 4.207:1 4.206:1 4.206:1
Suction Inlet 203/8” 254/10” 305/12” 305/12” 305/12”
Discharge Inlet 4” Flange
5000psi
5” Flange
5000psi
5” Flange
5000psi
5” Flange
5000psi
5” Flange
5000psi
Lubrication Forced & Splash Forced & Splash Forced & Splash Forced & Splash Forced & Splash
Max. Pressure 27.2MPa
3945psi
34.5MPa
5000psi
34.5MPa
5000psi
34.5MPa
5000psi
35MPa
5000psi
Overall Size(in) 144*106*86 156*79*66 163*89*70 174*121*78 181*129*106
Weight(kg) 9770 14500 18790 24572 24791
US $5,000-20,000
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: 1 Year
Warranty: 1 Year
Certification: ISO 9001:2000
Power Source: Electric
Operation Pressure: Vacuum
Applicable Medium: Mud, Water, Natural Gas, Crude Oil

###

Customization:

###

Model F-500 F-800 F-1000 F-1300 F-1600
Type Triplex single acting Triplex single acting Triplex single acting Triplex single acting Triplex single acting
Rated Power 373kw
500 HP
596kw
800 HP
735kw
1000 HP
969kw
1300 HP
1193kw
1600HP
Rated Speed 165SPM 150SPM 140SPM 120SPM 120SPM
Stroke(mm/inch) 190/7 1/2” 228.6/9” 254/10” 305/12” 305/12”
Max. Line Dia. 170/6 3/4” 170/6 3/4” 170/6 3/4” 180/7” 180/7”
Gear Type Herringbone Herringbone Herringbone Herringbone Herringbone
Valve Pot API-5 API-6 API-6 API-7 API-7
Gear Ratio 4.286:1 4.185:1 4.207:1 4.206:1 4.206:1
Suction Inlet 203/8” 254/10” 305/12” 305/12” 305/12”
Discharge Inlet 4” Flange
5000psi
5” Flange
5000psi
5” Flange
5000psi
5” Flange
5000psi
5” Flange
5000psi
Lubrication Forced & Splash Forced & Splash Forced & Splash Forced & Splash Forced & Splash
Max. Pressure 27.2MPa
3945psi
34.5MPa
5000psi
34.5MPa
5000psi
34.5MPa
5000psi
35MPa
5000psi
Overall Size(in) 144*106*86 156*79*66 163*89*70 174*121*78 181*129*106
Weight(kg) 9770 14500 18790 24572 24791

Types of pulleys and their advantages and disadvantages

There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
pulley

Basic equations of pulley systems

A pulley system is a mechanism that allows two blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the two blocks is the total tension and the force acting on the pulley is the weight of the two blocks.
This simple mechanism uses two simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
pulley

Types of pulleys

There are three basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The two most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than one “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than one type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are three main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have one advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.

application

What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
pulley

shortcoming

Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which two pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to four times their force when used in hydraulic lifts.

China F-1600 Triplex Mud Pump for Drilling Rig     pulley driveChina F-1600 Triplex Mud Pump for Drilling Rig     pulley drive
editor by czh 2022-11-26