Tag Archives: vacuum hand pump

China Hand Self Integration Control Vacuum Pump with high quality

Item Description

Hand Self Integration Manage Vacuum Pump
Product introduction:
Pneumatic vacuum transfer pump is a variety of pneumatic vacuum transfer pump with large load and strong suction, also recognized as sound transfer pump or drilling cuttings transfer pump. Capable of pumping solids, powders, liquids, and strong-liquid mixtures. The depth of pumping h2o is 8 meters, and the carry of discharged water is 80 meters. Its exclusive structural design enables it to operate in the most tough surroundings with minimal servicing fee. It can transportation resources with a lot more than eighty% sound period and large particular gravity at high pace. It has the following characteristics: the large-efficiency venturi device can generate up to 25 inches Hg (mercury) vacuum beneath sturdy air circulation to suck materials, and then transportation them by means of good force, with practically no use elements. It is frequently utilized for transportation of drilling cuttings, oily sludge, tank cleansing, extended-distance transportation of squander suction, and transportation of minerals and wastes. The vacuum pump is a one hundred% aerodynamic and intrinsically risk-free pneumatic transportation solution, capable of conveying solids with a greatest inlet diameter of 80%. The special patented venturi style creates a strong vacuum and higher airflow, which can recover up to twenty five meters (eighty two toes) of substance and discharge up to one thousand meters (3280 feet). Since there is no inner operating theory and no rotating susceptible parts, it gives a extremely value-successful answer for controlling the recovery and transfer of resources that are regarded as non pumpable.

Specialized parameters:

Design

TRSP-80L

TRSP-40L

TRSP-25W

TRSP-20L

TRSP-10L

Highest conveying ability

80m³/h

40m³/h

25m³/h

20m³/h

10m³/h

Feed and discharge diameter

four “DN100

4 “DN100

three”DN80

three”DN80

3″DN80

Suction length

≤50m

≤50m ≤50m ≤50m ≤50m
Discharge length

≤1000m

≤1000m

≤550m

≤550m

≤550m
Going for walks form mounted fixed transfer go transfer
Handle type Hand self integration Hand self integration computerized Hand self integration automated
Overflow diameter

≤70mm

≤70mm

≤50mm

≤50mm ≤50mm
Strain

650-800Kpa

650-800Kpa

550-700Kpa

550-700Kpa

550-700Kpa

Air supply

13m³/min

13m³/min

six.5m³/min

six.5m³/min

five.2m³/min

Size

3200×1500×2000mm

1600×1500×2000mm

2000×1000×1100mm

1000×800×1400mm

900×800×1400mm

Weight

1500kg

910kg

300kg

270kg

230kg

Relevant materials High viscosity material / powder solid content / 
Vacuum 25inch HG/85Kpa
Valve Made in Germany
Air manage Made in Japan, management and operation shall be oper

Enclosure
Identify Model Parameters Quantity Manufacturing unit configuration
Suction hand arm   Stainless steel one Standard configuration
Strong clamp at suction port

three/four

Steel two Common configuration
Slurry suction pipeline

three/four

10m one Normal configuration
Rapid link of suction port

F,C

Stainless metal 1 Normal configuration
Quick link of slurry outlet

A,C

Stainless steel 1 Normal configuration
Pneumatic control method

one Normal configuration
Gasoline oil-drinking water separator

Duplex 1 Standard configuration
Discharge arm of slurry outlet

JZXLB-01

Rotatable rigid tube 1 Optional
Slurry discharge pipeline

3/4

30m one Optional
Air compressor and air storage tank

one Optional
Air pipe

DN25/40

15m 1 Optional

Technological functions:
*The pump can be operated by 1 particular person on obligation
*Tremendous vacuum can soak up materials at 50m
*All flow-by way of areas of the pump body are nearly free of charge of wear
*Super large suction can soak up resources with a diameter of far more than 7cm
*Compressed air can be equipped centrally and transported remotely
*Ultra lengthy distance transportation, which can understand ultra long length of in excess of 1000m
*The pump can work indefinitely for a lengthy time without having restrict
*Substantial applicability to materials: powder, thinner, viscous material, sewage, oil stain, and so forth
*Full pneumatic control has the ability of hearth avoidance, explosion-evidence and dampness-proof, and can be employed in large-temperature instances
*The pump is managed by handbook, automatic and remote handle to meet up with far more use eventualities
*Pneumatic management has large trustworthiness and extended services daily life. The successful action occasions of electrical elements are about 1 million times, and the *Provider life of solenoid valves is a lot more than two hundred million instances

Relevant materials classification:
*Drilling waste mud and drilling cuttings discharged from vibrating display
*Jam, peanut butter, tomato sauce, pickled veggies
*Metal mine, coal mine slurry and tail slurry
*Substance transportation of bulk tanks and silos
*Chemical and pharmaceutical particle powder transportation
*HDD / TBM city building sludge
*Desilting of sedimentation tank and soaking tank
*Recycling of poisonous and dangerous wastes
*Tank sludge and bottom slag elimination
*Sand, fantastic sand and fracturing sand
*Large scale dredging of municipal pipelines
*Bilge cleansing of transportation ship
*Livestock and poultry feces

To Be Negotiated 1 Set
(Min. Order)

###

After-sales Service: Yes
Warranty: 1 Year
Oil or Not: Oil Free
Structure: Pneumatic Sludge Vacuum Pump
Exhauster Method: Pneumatic
Vacuum Degree: 25inch Hg/85kpa

###

Customization:

###

Model
TRSP-80L
TRSP-40L
TRSP-25W
TRSP-20L
TRSP-10L
Maximum conveying capacity
80m³/h
40m³/h
25m³/h
20m³/h
10m³/h
Feed and discharge diameter
4 "DN100
4 "DN100
3"DN80
3"DN80
3"DN80
Suction distance
≤50m
≤50m ≤50m ≤50m ≤50m
Discharge distance
≤1000m
≤1000m
≤550m
≤550m
≤550m
Walking form fixed fixed move move move
Control form Hand self integration Hand self integration automatic Hand self integration automatic
Overflow diameter
≤70mm
≤70mm
≤50mm
≤50mm ≤50mm
Pressure
650-800Kpa
650-800Kpa
550-700Kpa
550-700Kpa
550-700Kpa
Air supply
13m³/min
13m³/min
6.5m³/min
6.5m³/min
5.2m³/min
Size
3200×1500×2000mm
1600×1500×2000mm
2000×1000×1100mm
1000×800×1400mm
900×800×1400mm
Weight
1500kg
910kg
300kg
270kg
230kg
Applicable materials High viscosity material / powder solid material / 
Vacuum 25inch HG/85Kpa
Valve Made in Germany
Air control Made in Japan, control and operation shall be oper

###

Enclosure
Name Model Parameters Quantity Factory configuration
Suction hand arm   Stainless steel 1 Standard configuration
Strong clamp at suction port
3/4
Steel 2 Standard configuration
Slurry suction pipeline
3/4
10m 1 Standard configuration
Quick connection of suction port
F,C
Stainless steel 1 Standard configuration
Quick connection of slurry outlet
A,C
Stainless steel 1 Standard configuration
Pneumatic control system
1 Standard configuration
Gas oil-water separator
Duplex 1 Standard configuration
Discharge arm of slurry outlet
JZXLB-01
Rotatable rigid tube 1 Optional
Slurry discharge pipeline
3/4
30m 1 Optional
Air compressor and air storage tank
1 Optional
Air pipe
DN25/40
15m 1 Optional
To Be Negotiated 1 Set
(Min. Order)

###

After-sales Service: Yes
Warranty: 1 Year
Oil or Not: Oil Free
Structure: Pneumatic Sludge Vacuum Pump
Exhauster Method: Pneumatic
Vacuum Degree: 25inch Hg/85kpa

###

Customization:

###

Model
TRSP-80L
TRSP-40L
TRSP-25W
TRSP-20L
TRSP-10L
Maximum conveying capacity
80m³/h
40m³/h
25m³/h
20m³/h
10m³/h
Feed and discharge diameter
4 "DN100
4 "DN100
3"DN80
3"DN80
3"DN80
Suction distance
≤50m
≤50m ≤50m ≤50m ≤50m
Discharge distance
≤1000m
≤1000m
≤550m
≤550m
≤550m
Walking form fixed fixed move move move
Control form Hand self integration Hand self integration automatic Hand self integration automatic
Overflow diameter
≤70mm
≤70mm
≤50mm
≤50mm ≤50mm
Pressure
650-800Kpa
650-800Kpa
550-700Kpa
550-700Kpa
550-700Kpa
Air supply
13m³/min
13m³/min
6.5m³/min
6.5m³/min
5.2m³/min
Size
3200×1500×2000mm
1600×1500×2000mm
2000×1000×1100mm
1000×800×1400mm
900×800×1400mm
Weight
1500kg
910kg
300kg
270kg
230kg
Applicable materials High viscosity material / powder solid material / 
Vacuum 25inch HG/85Kpa
Valve Made in Germany
Air control Made in Japan, control and operation shall be oper

###

Enclosure
Name Model Parameters Quantity Factory configuration
Suction hand arm   Stainless steel 1 Standard configuration
Strong clamp at suction port
3/4
Steel 2 Standard configuration
Slurry suction pipeline
3/4
10m 1 Standard configuration
Quick connection of suction port
F,C
Stainless steel 1 Standard configuration
Quick connection of slurry outlet
A,C
Stainless steel 1 Standard configuration
Pneumatic control system
1 Standard configuration
Gas oil-water separator
Duplex 1 Standard configuration
Discharge arm of slurry outlet
JZXLB-01
Rotatable rigid tube 1 Optional
Slurry discharge pipeline
3/4
30m 1 Optional
Air compressor and air storage tank
1 Optional
Air pipe
DN25/40
15m 1 Optional

Pulley Type

There are several types of pulleys. These include fixed pulleys, load multipliers and movable pulleys. Below is a description of each pulley type. A load multiplier is a special type of pulley with multiple wheels for increased lifting capacity. It is used in a wide range of applications including power transmission and construction. Some common uses of pulleys are listed below.

moving pulley

Movable pulleys work by transferring the weight of a load to another object of the same mass. Since a live pulley is inherently frictionless and weightless, the force required to lift a load with it is the same as the weight of the load. This principle applies to tall buildings and residences. It is an excellent choice for lifting heavy objects such as furniture and washing machines.
A pulley is a mechanical device with a wheel that rotates on a shaft. The axle is attached to the wheel and is usually fixed. The movable pulley can be fixed or movable, both of which can change the direction of the force on the rope. Some pulleys can also change the magnitude and direction of the force. They are ideal for a variety of applications, from lifting heavy objects to transporting objects.
Another type of movable pulley works by transmitting force to another object. It has a free axis and the total force provided by the rope tension is balanced. Since the tension on the rope is constant in each segment, pulling one end of the rope will double the force on the shaft, resulting in two mechanical advantages. This mechanical advantage is the main reason why movable pulleys are so versatile.
Another form of moving pulley is called a KWL diagram. The KWL diagram summarizes the basic concepts of the drive wheel. KWL diagrams are an excellent way to assess a student’s understanding of the concepts discussed in the course. Word questions are a great way to check whether students understand concepts. When students answer the word questions correctly, the answer is yes!
pulley

Fixed wheel pulley

If you need to move heavy objects, a single fixed wheel pulley is not a good choice. Using a single fixed pulley might be similar to using a handbag, but it’s not very convenient. This type of pulley system relies on friction to transmit motion. As a result, it can slip and isn’t always reliable. Fortunately, you can find other options that work just as well.
Fixed pulleys are the most basic type of pulley. They consist of grooved wheels and ropes attached to objects. These pulleys make lifting easier. Because the rope or cable only moves in one direction, the movement of the object feels lighter. And they are also easy to install. However, before you buy a fixed wheel pulley, make sure it is strong enough to support the weight of the load.
The disadvantages of fixed pulleys are obvious. One of them is the lack of mechanical advantage. A fixed pulley pulls up with the same force as a single moving pulley, and a single fixed pulley is not particularly effective as a force multiplier. However, the effect is more pronounced when you combine multiple fixed-wheel pulleys. You will get double the power! So what do fixed wheel pulleys have to offer?
Fixed wheel pulleys can be as small as a ring. A single ring pulley requires twice as much force as the weight being pulled. Adding more loops to the rope will reduce the effort required to pull the weight. The mechanical advantage of a fixed pulley is proportional to the number of strands running to the free pulley. A 100-pound pull on the free end will lift a 300-pound load.
pulley

composite pulley

Compound pulleys are pulleys that can be used to change the direction of a control wire. It can also be used to modify the mechanical force of the wire by moving the item it is connected to. In galleons, compound pulleys are more common. They are often combined with other ropes for mechanical advantage. Here are some common uses for composite pulleys.
The ideal mechanical advantage of a pulley is equal to the number of rope segments that pull up the load. This means that the more rope segments, the less force is required. A compound pulley will have the ideal mechanical advantage of 2, which means it will generate more force than a simple pulley. Composite pulleys are also more efficient at transmitting force because their number of rope segments is usually equal to the unit weight.
Composite pulley systems use more than two pulleys and ropes. More pulleys will reduce the force required to move heavier objects. They are usually used in large sailboats. The system is also used on construction sites. It can be used for a variety of applications, including lifting large objects or transmitting electricity. You can imagine how it would change your life if you had to move a large sailboat, but the result would be the same: a composite pulley system would make it easier to lift a large sailboat.
Composite pulleys are also known as fixed pulleys. The fixed pulley is stationary, and the movable pulley moves back and forth. The latter is more effective when used with a detachable cord or strap. On the other hand, a moving pulley is a moving pulley and it gives you a mechanical advantage. You can imagine this pulley on a flagpole.

load multiplier

The multiplication system has three basic parts: the rope grab, the connector, and the pulley. While some basic multipliers may combine the three parts, the concept remains the same. The multiplication system can make pulling the rope easier by reducing the amount of friction that occurs. Below are some examples of multiplication systems. A compact rope grab is a great option for resetting the multiplier.
The load reduction that a pulley system can achieve is proportional to the number of ropes used to support it. Although most utility pulley systems use only four ropes, the theoretical maximum load reduction is a quarter of the actual load. In other words, the four-wheel system only reduces the weight of a 1,000-pound load by a quarter. That would require 167 pounds of force, a far cry from the 500-pound load a single pulley system can achieve.
The mechanical advantage of a pulley system can be calculated by calculating the ratio between the forces exerted on each wire. For example, a 90-kilogram load is supported by three ropes, each weighing about thirty-five pounds. The ropes on pulleys A and B each carry a load of 60 kg. Using this formula, a single pulley system will yield a mechanical advantage over two tractors.
To calculate the force required to pull the rope over the pulley, measure the angle and deflection between the ropes. The deflection angle when added to the included angle should equal 180 degrees. A 75 degree angle requires 159% of the load force. This means a total load multiplier of four. This formula is an important tool for calculating the force multiple of the pulley.
pulley

Disadvantages of fixed pulleys

There are two basic types of pulleys: movable and fixed. Active pulleys are more advanced, allowing the pulley to move according to the load. They reduce the force required to lift the load. Active roller pulleys are more compact and therefore take up less space. Both types are good for lifting heavier objects, but they each have their pros and cons.
Fixed wheel pulleys can be used to lift heavy objects. This type of pulley consists of a wheel with a fixed shaft that has grooves on its edges for guiding ropes or cables. This is a simple machine as no motor or engine is required to lift objects. When two or more wheels are used together, the ropes around the wheels form a powerful hoist.
Single wheel pulleys are not suitable for lifting. They tend to push things down. Also, they are unreliable because they rely on friction and can slip. Also, a single wheel pulley would require a lot of space. Another disadvantage of fixed-wheel pulleys is that they make it difficult to move heavy objects easily. Single fixed-wheel pulleys also tend to slip easily, making them a poor choice for many applications.
Fixed wheel pulleys are also easier to install and maintain than manually operated ones. It requires less space and lubrication than manual pulleys. Manual pulleys can cause injury because the operator will be lifting the full weight of the heavy object. Additionally, rope slippage can lead to muscle strains and rope burns. And the system requires frequent maintenance.

China Hand Self Integration Control Vacuum Pump     with high quality China Hand Self Integration Control Vacuum Pump     with high quality
editor by czh 2022-11-28