China Customized CNC Laser Machine Gt2 Drive Belt Pulley 16/20 Teeth 2gt Aluminum Timing Pulley pulley and belt

Solution Description

INDUSTRIAL TIMING PULLEY 

. Feature

Our Timing Belt utilizes Japan-imported high high quality artificial neoprene, substantial quality glass fiber wire and tooth area with nylon 66 higher extend do the safety. The timing belt adapts teeth or tooth mesh to transfer energy. It wants no lubrication, no slip, no pollution, significantly less noise. The transmission effectiveness is above 98%, and the pace ratio can attain 1:10. Linear velocity can be up to 50m/s. Its dynamic bending wind presents a good exhaustion functionality, and great growing older warmth-resistance abrasion performance.

. Parameters

Determine 1. Physicomechanical Home

Item  Trapezoid Enamel Arc Teeth
XL L H XH XXH 3M 5M 8M 14M 20M
Tensile Toughness N/mm 80 a hundred and twenty 270 380 450 ninety 160 300 four hundred 520
Elongation Reference at Loading   N 60 ninety 220 300 360 70 a hundred thirty 240 320 410
Adhesion strength of fabric N/mm five six.5 8 10 twelve 6 ten twelve fifteen
Adhesion strength of main N/mm two hundred 300 600 800 1500 four hundred seven hundred 1200 1600
Equipment shearing depth N/mm fifty sixty 70 seventy five ninety fifty sixty 80 one hundred
Elongation ≤ % 4%
Hardness Shore A 75 ± 5

Figure 2: Belt Tooth Measurement

Sort Pitch (pb) mm Tooth top (ht) mm Belt thick (hs) mm Angle
MXL 2.032 .51 one.fourteen 40º
XXL three.one hundred seventy five .seventy six 1.52 40º
XL 5.080 1.27 2.three 40º
L nine.525 one.91 three.6 40º
H 12.seven 2.29 four.3 40º
XH 22.225 6.35 eleven.two 40º
XXH 31.seven 9.fifty three 15.seven 40º
T2.five two.5 .7 one.3 40º
T5 5. one.two two.two 40º
T10 10 two.five 4.five 40º
T20 twenty five. 8. 40º
AT5 five. one.2 two.seven 40º
AT10 10 two.5 5. 40º
AT20 twenty five. eight. 40º

 
. Production Equipment
01, pulley CNC processing zone                            02, synchronous belt creating machine                  03, synchronous spherical roll enamel processing zone
04, synchornous belt curing processing zone        05, 3 roll calender                                            06, immediate travel belt forming equipment
07, pulley workshop timing mould

. Quality Tests
 

FAQ

Q1.  Can I have a sample purchase?
        Yes, any sample buy is welcome to know the high quality of our goods.

Q2.  What about the direct time of the sample or the closing order?
        2-5 days for typical sample.
        20-30 days for a formal order.

Q3. How considerably is the minimal quantity for each item in 1 buy?
       One CZPT quantity is alright. Generally close to 100pcs for tiny item, several dozens for large merchandise. 

This fall. Is it possible to print our logo or brand on the belt?
       Yes, we can print your symbol or layout on the belt following receipt of your formal authorization        letter of the emblem or your brand name.

Q5. Do you supply the guarantee for your product?
       Yes, normally we provide 1 calendar year guarantee for all of our items.

 

 

Standard or Nonstandard: Standard
Application: Electric Cars, Motorcycle, Car
Feature: Wear-Resistant, High Temperature-Resistance
Tensile Strength: Strong
Material: Rubber
Type: Toothed Belt

###

Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Item  Trapezoid Teeth Arc Teeth
XL L H XH XXH 3M 5M 8M 14M 20M
Tensile Strength N/mm 80 120 270 380 450 90 160 300 400 520
Elongation Reference at Loading   N 60 90 220 300 360 70 130 240 320 410
Adhesion strength of cloth N/mm 5 6.5 8 10 12 6 10 12 15
Adhesion strength of core N/mm 200 300 600 800 1500 400 700 1200 1600
Gear shearing intensity N/mm 50 60 70 75 90 50 60 80 100
Elongation ≤ % 4%
Hardness Shore A 75 ± 5

###

Type Pitch (pb) mm Tooth height (ht) mm Belt thick (hs) mm Angle
MXL 2.032 0.51 1.14 40º
XXL 3.175 0.76 1.52 40º
XL 5.080 1.27 2.3 40º
L 9.525 1.91 3.6 40º
H 12.7 2.29 4.3 40º
XH 22.225 6.35 11.2 40º
XXH 31.7 9.53 15.7 40º
T2.5 2.5 0.7 1.3 40º
T5 5.0 1.2 2.2 40º
T10 10 2.5 4.5 40º
T20 20 5.0 8.0 40º
AT5 5.0 1.2 2.7 40º
AT10 10 2.5 5.0 40º
AT20 20 5.0 8.0 40º
Standard or Nonstandard: Standard
Application: Electric Cars, Motorcycle, Car
Feature: Wear-Resistant, High Temperature-Resistance
Tensile Strength: Strong
Material: Rubber
Type: Toothed Belt

###

Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Item  Trapezoid Teeth Arc Teeth
XL L H XH XXH 3M 5M 8M 14M 20M
Tensile Strength N/mm 80 120 270 380 450 90 160 300 400 520
Elongation Reference at Loading   N 60 90 220 300 360 70 130 240 320 410
Adhesion strength of cloth N/mm 5 6.5 8 10 12 6 10 12 15
Adhesion strength of core N/mm 200 300 600 800 1500 400 700 1200 1600
Gear shearing intensity N/mm 50 60 70 75 90 50 60 80 100
Elongation ≤ % 4%
Hardness Shore A 75 ± 5

###

Type Pitch (pb) mm Tooth height (ht) mm Belt thick (hs) mm Angle
MXL 2.032 0.51 1.14 40º
XXL 3.175 0.76 1.52 40º
XL 5.080 1.27 2.3 40º
L 9.525 1.91 3.6 40º
H 12.7 2.29 4.3 40º
XH 22.225 6.35 11.2 40º
XXH 31.7 9.53 15.7 40º
T2.5 2.5 0.7 1.3 40º
T5 5.0 1.2 2.2 40º
T10 10 2.5 4.5 40º
T20 20 5.0 8.0 40º
AT5 5.0 1.2 2.7 40º
AT10 10 2.5 5.0 40º
AT20 20 5.0 8.0 40º

How to use the pulley system

Using a pulley system is a great way to move things around your home, but how do you use a pulley system? Let’s look at the basic equations that describe a pulley system, the types of pulleys, and some safety considerations when using pulleys. Here are some examples. Don’t worry, you’ll find all the information you need in one place!
pulley

Basic equations of pulley systems

The pulley system consists of pulleys and chords. When the weight of the load is pulled through the rope, it slides through the groove and ends up on the other side. When the weight moves, the applied force must travel nx distance. The distance is in meters. If there are four pulleys, the distance the rope will travel will be 2×24. If there are n pulleys, the distance traveled by the weight will be 2n – 1.
The mechanical advantage of the pulley system increases with distance. The greater the distance over which the force is applied, the greater the leverage of the system. For example, if a set of pulleys is used to lift the load, one should be attached to the load and the other to the stand. The load itself does not move. Therefore, the distance between the blocks must be shortened, and the length of the line circulating between the pulleys must be shortened.
Another way to think about the acceleration of a pulley system is to think of ropes and ropes as massless and frictionless. Assuming the rope and pulley are massless, they should have the same magnitude and direction of motion. However, in this case the quality of the string is a variable that is not overdone. Therefore, the tension vector on the block is labeled with the same variable name as the pulley.
The calculation of the pulley system is relatively simple. Five mechanical advantages of the pulley system can be found. This is because the number of ropes supporting the load is equal to the force exerted on the ropes. When the ropes all move in the same direction, they have two mechanical advantages. Alternatively, you can use a combination of movable and fixed pulleys to reduce the force.
When calculating forces in a pulley system, you can use Newton’s laws of motion. Newton’s second law deals with acceleration and force. The fourth law tells us that tension and gravity are in equilibrium. This is useful if you need to lift heavy objects. The laws of motion help with calculations and can help you better understand pulley systems.
pulley

Types of pulleys

Different types of pulleys are commonly used for various purposes, including lifting. Some pulleys are flexible, which means they can move freely around a central axis and can change the direction of force. Some are fixed, such as hinges, and are usually used for heavier loads. Others are movable, such as coiled ropes. Whatever the purpose, pulleys are very useful in raising and lowering objects.
Pulleys are common in many different applications, from elevators and cargo lift systems to lights and curtains. They are also used in sewing machine motors and sliding doors. Garage and patio doors are often equipped with pulleys. Rock climbers use a pulley system to climb rocks safely. These pulley systems have different types of pinions that allow them to balance weight and force direction.
The most common type of pulley is the pulley pulley system. The pulley system utilizes mechanical advantages to lift weight. Archimedes is thought to have discovered the pulley around 250 BC. in ancient Sicily. Mesopotamians also used pulleys, they used ropes to lift water and windmills. Pulley systems can even be found at Stonehenge.
Another type of pulley is called a compound pulley. It consists of a set of parallel pulleys that increase the force required to move large objects. This type is most commonly used in rock climbing and sailing, while composite pulleys can also be found in theater curtains. If you’re wondering the difference between these two types of pulleys, here’s a quick overview:

Mechanical Advantages of Pulley Systems

Pulley systems offer significant mechanical advantages. The ability of the system to reduce the effort required to lift weights increases with the number of rope loops. This advantage is proportional to the number of loops in the system. If the rope had only one loop, then a single weight would require the same amount of force to pull. But by adding extra cycles, the force required will be reduced.
The pulley system has the advantage of changing the direction of the force. This makes it easier to move heavy objects. They come in both fixed and mobile. Pulleys are used in many engineering applications because they can be combined with other mechanisms. If you want to know what a pulley can do, read on! Here are some examples. Therefore, you will understand how they are used in engineering.
Single-acting pulleys do not change direction, but compound pulleys do. Their mechanical advantage is six. The compound pulley system consists of a movable pulley and a fixed pulley. The mechanical advantage of the pulley system increases as the number of movable wheels decreases. So if you have two wheels, you need twice as much force to lift the same weight because you need a movable pulley.
The mechanical advantage of a pulley system can be maximized by adding more pulleys or rope lengths. For example, if you have a single pulley system, the mechanical advantage is one of the smallest. By using two or three pulleys, up to five times the mechanical advantage can be achieved. You can also gain up to ten times the mechanical advantage by using multiple pulley systems.
The use of a single movable pulley system also adds to the mechanical advantage of the pulley system. In this case, you don’t have to change the direction of the force to lift the weight. In contrast, a movable pulley system requires you to move the rope farther to generate the same force. Using a compound pulley system allows you to lift heavy loads with ease.
pulley

Safety Issues When Using Pulley Systems

Pulleys have an incredibly unique structure, consisting of a disc with a groove in the middle and a shaft running through it. A rope or cord is attached to one end of a pulley that turns when force is applied. The other end of the rope is attached to the load. This mechanical advantage means that it is much easier to pull an object using the pulley system than to lift the same object by hand.
Although pulley systems are a common part of many manufacturing processes, some employers do not train their workers to use them properly or install protection to prevent injury. It is important to wear proper PPE and follow standard laboratory safety practices during pulley system activities. Make sure any support structures are strong enough to handle the weight and weight of the rope or rope. If you do fall, be sure to contact your employer immediately.

China Customized CNC Laser Machine Gt2 Drive Belt Pulley 16/20 Teeth 2gt Aluminum Timing Pulley     pulley and belt	China Customized CNC Laser Machine Gt2 Drive Belt Pulley 16/20 Teeth 2gt Aluminum Timing Pulley     pulley and belt
editor by czh 2022-12-16